News-GangXin Glass Tempering Furnace-Luoyang GangXin Glass Technology Co.,Ltd

Position：首页 >> News

Istanbul Glass EXPO 2015 pre-fair NoticeTime:March 11-14, 2015Place:Stand 404A/1, Hall 12, Tuyap Fair Convention and Congress Center, Istanbul, TurkeyThis year, GANGXIN will attend this expo with its entire series of technical solutions for the flat and bent tempered glass porduc···...

201502-28
Classification of four major systems for glass tempering furnacesThere are various types of glass tempering furnaces and their structures are becoming increasingly complex. However, from the perspective of implementing system functions, they mainly include the following subsystems: power system, transmis···...

201501-05
Industry Application of Tempered GlassTempered glass belongs to safety glass. Tempered glass is actually a type of pre-stressed glass. To improve the strength of glass, chemical or physical methods are usually used to form compressive stress on the surface of the glass. When th···...

201501-05
The Use and Maintenance of Convection Fans in Forced Convection Tempering UnitsWhen the temperature inside the tempering furnace exceeds 300 degrees, the convection fan inside the furnace should not be stopped for a long time to avoid deformation of the fan impeller.The correct frequency range for the use of the conve···...

201501-05
Process Control and Advantages and Disadvantages Analysis of Hot Bend GlassAs a type of safety glass, hot bending laminated glass has a wide range of applications. This product is made of two or more layers of hot bending glass bonded with PVB film, which has high strength and toughness, strong collision resistanc···...

201501-05
Current status of glass deep processing equipment in ChinaThe development of China's glass machinery industry began in the early 1990s, mainly due to the migration of foreign (Taiwanese) enterprises, which began to take root and sprout in China. With the regional transfer of world processing facto···...

201501-05
Exploring the Future Development Path of Shower Room IndustryNowadays, national standards require that the glass in shower rooms must be tempered glass with high purity and safety factor. The national standard requires that the broken state of tempered glass with a thickness of 6-10 mm should be main···...

201501-05
Emergency method for tempered glass safety hammerThe safety hammer mainly uses its conical tip. Due to the small contact area of the tip, when using the hammer to hit glass, the pressure at that contact point on the glass (not pressure, but pressure per unit area) is quite high. This is s···...

201501-05
Precautions for using tempered glassWhen selecting, it is important to verify whether tempered glass products have 3C markings, and other precautions are as follows.Consumers should try not to choose products that are too large in area or too thick in structure when purchasin···...

201501-05
Reasons for the ineffective effect of insulating glass on noiseWith the continuous improvement of people's living conditions, the requirements for living sound environment are also constantly increasing. In the process of controlling traffic noise pollution, hollow glass windows are widely promoted by ···...

201501-05